Products

Our Approach to Quality

We focus on sourcing from established manufacturing partners and reviewing samples for alignment with what was requested before products move forward. While customers are responsible for testing and final approval, we aim to set up each program for success by identifying issues early and maintaining consistency across runs.

Quality During Product Development

We work to ensure requirements are understood before sampling begins and review development samples for consistency with what was requested. Our mills are communicative during production and will flag potential quality concerns if they notice issues with materials or execution along the way. This helps surface potential issues early and reduces the risk of rework later in the process.

Incoming Sample Review

Incoming sample review focuses on visual and specification alignment rather than technical testing. We review samples when they arrive to compare them against what was originally requested and confirm that key details match the agreed specifications. We do not perform technical or performance testing. This step helps catch obvious discrepancies before samples are sent to customers for their own testing and approval.

Coordination with Customers

Coordination with customers is key to getting custom products right. When an exact product match is required, we typically need at least half a dozen reference samples. Some of these are sent to the mill to guide development, and some are kept on our end for review and comparison throughout the process. This shared reference helps ensure everyone is aligned on details and reduces back and forth during development.

Customer Testing and Final Approval

Customer testing and final approval are required before production begins. Customers are responsible for evaluating samples based on their own standards, application requirements, and any testing or compliance needs specific to their use case. Once a sample is approved, the customer receives an invoice and submits the required deposit, which serves as formal authorization to move into production. Choosing to move forward without testing or formal approval is permitted, but production orders are non refundable if the final product does not meet expectations in these cases.

Issue Identification Resolution

When issues are identified during development or production, we work to address them as early as possible. Concerns may be flagged by our manufacturing partners, by us during sample review, or by customers during testing. We coordinate communication between all parties to clarify the issue, determine next steps, and adjust specifications or production as needed. This collaborative approach helps resolve problems efficiently and reduces the likelihood of the same issue repeating in future runs.

Documentation and Traceability

Documentation and traceability focus on keeping orders visible as they move through production and fulfillment. We are able to track shipments from the mill to our warehouse and provide updates to customers as goods are in transit to us. Once orders ship from our warehouse, customers receive a USPS or UPS tracking number so they can follow delivery to their facility.

Continuous Improvement

Continuous improvement comes from learning across each project and applying those insights to future programs. Feedback from customers, observations during sampling and production, and communication with manufacturing partners all inform how we refine specifications, sourcing decisions, and processes over time. This ongoing refinement helps reduce friction on future runs and supports more consistent outcomes as programs continue.

Call us with questions Monday-Friday 7 a.m. - 4 p.m.

Program Overview

Our warehousing program is designed to keep approved goods on hand so customers have reliable access without repeating development or waiting through full production lead times each time they need to reorder. Once a product is finalized and produced, inventory can be stored at our facility and released as needed based on customer demand. This approach supports continuity, reduces downtime between runs, and allows customers to plan production without waiting through the production process for each order.

One Time Development, Ongoing Availability

Custom products go through a one time development and approval process before production begins. Once specifications are finalized and goods are produced, items can be kept in our warehouse for ongoing availability. As programs settle into a routine, we learn typical usage patterns and can anticipate when restocking is needed to maintain continuity. Higher volume programs also benefit from lower per unit costs, making it more cost effective to maintain inventory as demand grows.

Inventory Held On Your Behalf

Inventory held on your behalf means approved goods are stored at our warehouse specifically for your program and reserved for your use. This allows you to draw down inventory as needed without waiting for new production runs. Holding inventory in this way supports continuity and helps avoid supply gaps once a product is in regular use. In these circumstances, the cost of the product may increase to account for reserved storage space and handling.

Release and Fulfillment Options

Release and fulfillment options allow warehoused goods to be shipped as needed rather than all at once. Our mills have minimum order requirements for production, but customers may not always be able to take the full quantity at one time. In these cases, goods can be produced in full and released from our warehouse in stages based on customer needs. Customers pay for the goods as they take them. Orders are fulfilled from our warehouse and shipped via standard domestic carriers, allowing inventory to move in a way that aligns with production without requiring extremely large one time shipments.

Forecasting and Reorder Planning

Forecasting and reorder planning help keep warehoused programs running smoothly. As usage patterns become clear, we work with customers to estimate when inventory will need to be replenished so production can be scheduled before stock runs low. Sharing anticipated usage and reorder timing helps avoid gaps in availability and reduces the need for rushed production or expedited freight. This planning supports more predictable supply and steadier costs over time.

Lead Time Reduction

Warehousing significantly reduces lead times by eliminating the need to repeat development and production for each reorder. Once goods are produced and stored at our facility, releases can be fulfilled as needed without waiting for manufacturing or international transit. This allows customers to access inventory more quickly and maintain continuity in their programs without planning around full production cycles each time.

Volume and Scale Considerations

Warehousing programs are best suited for customers with consistent usage and sufficient volume to make storage worthwhile on both sides. Holding inventory requires space and management, so programs need to reach a scale where warehousing adds real value rather than unnecessary cost. We evaluate volume and reorder frequency with customers to determine whether a warehousing program makes sense and is sustainable over time. This is all determined on a case by case basis.

Storage and Handling

Warehoused goods are stored and handled at our temperature controlled facility outside of Pittsburgh, Pennsylvania. Inventory is kept in the same location where orders are fulfilled, so goods are ready to ship whenever releases are requested. This centralized setup helps maintain quick fulfillment

Program Costs and Commitments

Warehousing programs involve costs and commitments that vary based on volume, storage needs, and whether goods are reserved exclusively for a single customer. All warehousing related costs are accounted for within the product cost, and we do not charge monthly storage fees for holding items. Customers are not required to enter into contracts to participate in a warehousing program. Because warehousing requires space and ongoing management, programs are best suited for customers with consistent demand, and we ask that customers communicate openly if they believe a warehousing program is or is not a suitable fit for their needs.

When a Warehousing Program Makes Sense

A warehousing program makes the most sense for customers with consistent usage, repeat ordering patterns, and production needs that benefit from having inventory readily available. It is especially useful when mill minimums are higher than what can be taken all at once, or when lead time reduction is important to ongoing operations. For programs with irregular demand or one time needs, warehousing may add unnecessary cost, and in stock or direct production runs are often the better fit.

Exclusives and Reservations

We try to avoid exclusives and reserved products unless they are explicitly requested and truly necessary for a program. The only instances where we guarantee exclusivity are branded items that include a customer’s name, logo, or label. For generic products or components that may be useful to multiple customers, we prefer to make those available more broadly rather than reserving them for a single program. This approach allows us to support a wider range of customers while still honoring exclusivity when branding or proprietary requirements make it essential. First and foremost, Heit's is committed to doing what is fair.

Qualifying Customers

We aim to be inclusive by not restricting customers with minimum order requirements for standard in stock purchasing. In the case of special orders or custom production, minimum quantities may apply for both new and existing customers based on manufacturing requirements. When it comes to warehousing programs, we qualify customers based on volume, consistency of use, and overall program needs. We never begin these conversations by assuming a company is not qualified. Our goal is simply to guide you toward the right solution based on what makes sense for your business.

Call us with questions Monday-Friday 7 a.m. - 4 p.m.

Built on Long-Term Relationships

Heit’s manufacturer network is built on long term working relationships developed through consistent collaboration and mutual reliability. Our partners trust us to bring them serious, well defined inquiries, which helps keep development and production focused and efficient. These established relationships allow for clearer communication, more predictable timelines, and better alignment on expectations. Over time, this continuity supports more consistent results and fewer disruptions across programs.

Specialized Manufacturing Partners

We work with different manufacturing partners based on their specific areas of specialization. Certain mills are better suited for particular product types, materials, processes, or customization methods, and we match each project with the partner best equipped to handle those requirements. We almost never bid projects to vendors we do not already know, as working with established partners helps maintain reliability, communication, and consistent outcomes across development and production.

Domestic and International Partners

Our manufacturing network includes both domestic and international partners, allowing us to support a range of product types, volumes, and capabilities. Partner selection is based on what best fits the requirements of each project, including materials, process, scale, and timeline. We can inquire with mills about where their raw materials are sourced, but we do not have full visibility into every tier of sourcing and cannot provide total guarantees. We are transparent about whether finished products are produced domestically or internationally, but any raw material sourcing information is based on what our partners are able to share with us.

Product Development Capabilities

Our product development capabilities focus on sourcing and execution, not design. We do not provide design services or create new product concepts. We work from customer provided specifications, samples, and requirements to source and develop components through our manufacturing partners. We can, however, make practical suggestions based on made to order samples we may have on hand to help guide decisions around materials, finishes, or construction.

Capacity and Scale

Our manufacturing network is built to support high volume production at scale. We work with partners who can handle large orders and repeat runs while maintaining consistency with approved specifications.

Consistency and Continuity

Consistency and continuity come from working with the same manufacturing partners and locked in specifications over time. Once a product is approved, repeat runs follow the same references to help maintain uniform results across production. This continuity reduces variation and supports reliable outcomes as programs continue and scale.

Communication and Coordination

Communication and coordination are central to how we manage sourcing and production. We act as the primary point of contact between customers and manufacturing partners, keeping details aligned and information flowing throughout development and production. This structure helps reduce miscommunication, keeps projects organized, and allows customers to work through one consistent channel rather than managing multiple vendors.

Responsible Sourcing Practices

Responsible sourcing practices focus on working with established manufacturing partners who meet our standards for reliability and communication. We prioritize long term relationships with partners we know and trust and avoid shifting production between unknown vendors. While we can inquire about raw material sourcing and manufacturing practices, visibility varies by partner, and we communicate what we are able to verify. This approach emphasizes consistency and accountability over one off sourcing decisions.

Finding New Vendors

We are selective about bringing new vendors into our manufacturing network. New partners are considered when specific capabilities, capacity, or specialization are needed that our existing network does not cover. Working with a new vendor can introduce unexpected costs and we cannot guarantee timelines on the first production run. We are happy to pursue new partnerships when needed, as long as customers are comfortable with the potential variability and risks that can come with onboarding a new manufacturer.

Call us with questions Monday-Friday 7 a.m. - 4 p.m.

Purpose of Sampling

Sampling exists to confirm that a product meets defined specifications before moving into full production. It allows details such as fit, function, finish, and compatibility to be reviewed and aligned with real world use. Sampling reduces risk by identifying issues early, creating a clear reference point for production, and ensuring both sides agree on what the final product should be. This step helps establish consistency across future runs and avoids costly adjustments later in the process.

Sample Types

Sample types generally fall into two categories. Some samples can be pulled quickly from items our manufacturing partners already produce or keep in stock, allowing for faster review and basic evaluation. Other samples require development to meet specific requirements, such as custom finishes, branding, or functional changes. Development samples take additional time because they involve setup, adjustments, and production at the mill. Understanding which type of sample is needed helps set realistic expectations for timelines and next steps before moving into full production.

Customer Testing and Approval

Customer testing and approval are required before any custom product moves into production. Customers are responsible for evaluating samples based on their own standards, application requirements, and any testing or compliance needs specific to their use case. When we provide timelines, we account for approximately one week for customer testing and approval, and any additional time beyond that extends the overall timeline on the customer side. Customers may choose to move forward without sampling or formal approval to save roughly a month of development time; however, production orders are non refundable if the final product does not meet expectations in this instance. We highly recommend sampling and testing so everyone is aligned before production begins, especially when parts need to work with specific machinery or when the item is unusual or highly specialized.

Our Role in the Sampling Process

Our role in the sampling process is to coordinate development with our manufacturing partners and act as the point of contact throughout. We handle communication, request samples based on approved specifications, and review samples for consistency with what was requested before sending them to customers. We keep the process organized and transparent so customers know what to expect at each stage.

Customer Responsibility for Testing

Customers are responsible for all testing, validation, and final approval of samples before production begins. This includes confirming fit, function, compatibility with machinery or applications, and any performance or compliance requirements specific to their use case. We coordinate sampling and review for consistency with requested specifications, but customers determine whether a product meets their standards and needs. We cannot guarantee long term results related to laundering, wear, or durability, as performance depends on use conditions outside of our control. This responsibility ensures the final product is appropriate for real world use before full production moves forward.

Sample Quantities

Sample quantities vary based on the product and the type of testing required. In many cases, we can provide a small number of pieces at little to no cost for basic evaluation. If larger batches are needed to test a full production run or confirm compatibility with machinery, additional costs may apply due to production setup and materials. We review sample quantity needs early so expectations are clear before sampling begins.

Sample Lead Times

Sample lead times depend on whether a sample can be sourced from existing inventory or requires development. In most cases, customers can expect to receive a sample in about six weeks.

Sample Costs and Production Deposits

Sample costs and production deposits are determined on a case by case basis, depending on the product, level of customization, and development scope. In some situations, small sample quantities may be provided at no cost, while larger or more complex sample runs may involve setup or production fees. Production deposits typically start at 50 percent before production begins, with the remaining 50 percent due when goods are ready to ship. These terms are subject to change based on circumstances, and any costs or deposit requirements are outlined clearly before work begins so expectations are set up front.

Approval to Production

Approval to move into production occurs once the estimate is approved by the customer. At that point, the customer receives an invoice and submits the required deposit, which serves as formal authorization to begin production. This step confirms that specifications, pricing, and timelines are accepted and that production can proceed. Once production is underway, pricing is locked in for that production run, and no additional costs should arise other than shipping from our warehouse to your facility. At this point, the customer will also choose how the goods should be packaged, and production will begin immediately.

Call us with questions Monday-Friday 7 a.m. - 4 p.m.

In Stock vs. Custom Production

In stock and custom production serve different needs, and the right option depends on timing, volume, and requirements. In stock items are best suited for immediate needs, smaller runs, or when standard specifications meet your application. Custom production is the better fit when components need to meet specific functional requirements, branding standards, or high volume consistency. We help customers evaluate which approach makes sense based on how the product will be used, how often it will be reordered, and how quickly it needs to be available.

Typical Lead Time Ranges

Lead times vary based on whether products are in stock or require custom development and production. In stock items are typically available to ship immediately. Custom development and production follow a longer timeline that includes sampling, approval, production, and transit to our warehouse, with full development processes averaging 10 to 12 weeks when everything moves smoothly. Additional time may be required depending on sample revisions, production capacity, freight method, and time of year. We provide realistic lead time estimates early in the process so customers can plan with confidence.

Factors that Influence Timelines

Lead times tend to stay fairly consistent across most product types, and we work within reliable timeline ranges. The biggest factor that can influence timing is which mill is selected for production, as different partners have different capabilities and capacity at any given time. Our network of mills is built on long lasting, successful working relationships, which helps us maintain dependable timelines and consistent results. We choose partners carefully based on the needs of each program and set expectations up front so production stays predictable and aligned with your requirements.

Sampling and Approval Windows

We begin each project with clear and transparent timelines so expectations are set from the start. We do not place time constraints on customers during the sampling and approval process, and while we may send follow up emails to check in, decisions are never rushed and approvals move forward on your timeline. In some cases, a deposit is required before the sampling process begins, depending on the product and development scope. Customer side delays in review, testing, or approvals can affect overall timelines, and while we will do everything we can to accommodate changes or compressed schedules when this happens, any resulting time constraints are ultimately driven by factors outside of our control.

Production Scheduling

Production scheduling begins once specifications are approved and samples are signed off. At that point, production is coordinated with the selected mill based on capacity and current production windows. We discuss with customers how often production will need to take place based on their program needs and usage patterns, and customers can provide target timelines for when they would like reorders placed to help avoid delays. If goods are not being warehoused with us, customers should plan to place reorders at least 6 weeks in advance to allow for production and transit. We work within established schedules to keep timelines predictable and coordinate closely with our manufacturing partners to keep production aligned with agreed expectations.

Freight and Transit Time

Freight and transit time depend on the shipping method selected once production is complete. Air freight typically takes about two weeks, while sea freight averages closer to six weeks. Air freight significantly increases overall cost and is best suited for situations where speed is critical. Freight costs from the manufacturer to our warehouse are already accounted for in the product cost. Once goods arrive at our warehouse, domestic shipping to customers is handled via USPS or UPS and typically takes about a week.

One-Time Development vs. Re-Orders

Custom product development is a one time process designed to establish specifications, samples, and approvals before production begins. Once a product is finalized, reorders do not require repeating the development phase and can move directly into production or be released from warehoused inventory if a warehousing program is in place. We do our best to keep reorders consistent in pricing and avoid unexpected increases. We do not price products at cost to win business and then raise prices unexpectedly later. Over time, as costs change, pricing may increase slightly, and when that happens it is clearly communicated before any order is placed. We typically give advance notice so customers know when a price change is coming on a future order.

Planning Ahead

We do our best work when customers plan ahead. Early conversations allow time to review specifications, align on timelines, and choose the right sourcing approach before production windows fill up. Planning ahead also helps avoid the need for expedited freight or last minute adjustments that can add cost or complexity. When customers share their timelines and upcoming needs in advance, we can provide more predictable lead times and smoother execution from start to finish.

What We Can and Cannot Control

We control the parts of the process that involve coordination, communication, and how we manage sourcing, development, and fulfillment on our end. This includes selecting appropriate manufacturing partners, setting clear timelines, coordinating sampling and production, and keeping customers informed along the way. There are elements we cannot control, such as mill capacity at a given time, transit conditions, customs delays, or the speed of customer approvals and testing. We plan carefully to reduce risk where possible and communicate early when external factors may affect timelines.

Dropshipping

We almost never dropship products. Keeping goods within our warehouse allows us to maintain quality control, ensure accuracy, and protect the integrity of our business and customer relationships. We provide a time saving service that removes much of the managerial work our customers would otherwise need to handle, and maintaining that level of service depends on keeping fulfillment within our control. For these reasons, we avoid dropshipping so we can continue to offer consistent quality, accountability, and dependable support.

Call us with questions Monday-Friday 7 a.m. - 4 p.m.

Branded Hardware and Trims

Branded hardware and trims are a popular option for private labels and fashion brands running high volume production lines that want their components to feel distinct and recognizable. We support branded snaps, buttons, trims, and elastics using printing, engraving, or woven branding depending on the product and application. To get started, we will need your graphics along with samples of what you would like branded, or we can apply branding to an existing product we already carry. Branded items are produced exclusively for your program and reserved for your use, and customers must take the full minimum order quantity for each custom run. This approach allows brands to add custom identity to their components while keeping the development process straightforward and repeatable.

Private Label Development

Private label development works best when brands come to us with designs and plans already in place. We do not offer in house design services, but we specialize in sourcing and producing components based on your existing specifications, references, and requirements. When brands arrive with clear direction, we can move efficiently through sampling, development, and production to bring those components into market. This approach keeps the process focused, practical, and aligned with established brand standards.

Sampling and Approval

Sampling and approval are key steps in custom development and help ensure products align with defined specifications before production begins. We coordinate the sampling process with our manufacturing partners and review samples for consistency with the original request before sharing them with customers. Customers are responsible for their own testing, evaluation, and final approval based on their specific standards and application. Once a sample is approved, production can move forward with a clear reference point, helping maintain consistency across runs.

Minimum order Quantities

Minimum order quantities vary from product to product and are influenced by several factors within the production process. These can include materials, manufacturing method, tooling requirements, customization level, and production setup. Because of this, minimums are not one size fits all and are determined on a case by case basis once specifications are reviewed by the mill we see best fit for the project. We walk customers through these requirements early so expectations are clear before development or production begins.

Production and Scale

Production and scale are planned around approved specifications and defined program needs. Once a product is finalized, production can move from initial runs into larger volume manufacturing as demand increases. Scale is supported through established manufacturing partners and repeatable processes that help maintain consistency across runs. This structure allows programs to grow without reworking development each time, keeping production efficient and predictable as volumes increase.

Warehousing and Re-Orders

Once a custom product is finalized and produced, warehousing allows approved goods to be held on hand for ongoing access. This eliminates the need to repeat development or wait through full production lead times for each reorder. Reorders are released from warehoused inventory as needed, supporting consistent supply while keeping programs running smoothly. Warehousing costs are accounted for within the product cost based on each customer’s needs, and items produced exclusively for a single customer may contribute to higher overall costs due to dedicated storage and handling.

Timeline Expectations

Full product development processes typically take an average of 10 to 12 weeks when everything moves smoothly the first time. It is fairly common for us to get the product right on the first try, which helps keep timelines on track. Timelines can extend if multiple sample rounds are needed or when production overlaps with certain holidays or high volume times of the year. We move quickly on our end and keep the process moving whenever approvals and information are in place. In most cases, extensions happen because decisions, testing, or approvals take longer on the customer side, and we work closely with customers to keep things moving as efficiently as possible.

Cost Considerations

One of the benefits of working with us is that costs are presented clearly and simply. You receive one number, FOB Pittsburgh, that accounts for the full scope of production and logistics. This includes factors manufacturers often have to manage separately such as tariffs, mold fees, materials, labor, storage, shipping, and handling. We do not itemize these individual costs for customers, which saves time and money by removing guesswork and eliminating the need to manage each variable on your own. Factors such as compressed timelines or the need to expedite freight by air can contribute to higher overall costs, and warehousing programs or exclusive products reserved for a single customer may also impact pricing. Once goods are at our warehouse and ready to ship, the only additional cost is shipping from our facility to your warehouse.

When Customization Makes Sense

Customization makes the most sense when standard in stock products do not fully meet your functional, branding, or production requirements. This often applies to high volume programs, private label lines, or applications where consistency across runs is critical. Custom development is also a good fit when components need to align with specific machinery, specifications, or brand standards. For smaller runs or short term needs, in stock options are often the more practical and cost effective choice, and we are happy to help determine which approach makes the most sense for your application.

Color Matching, Finishings, Functional Specifications, you name it.

Color matching, finishes, and functional specifications are often where custom development makes the biggest difference. We support customization across visual and performance details so components align with brand standards and application requirements. This can include matching existing colors or finishes, adjusting coatings or surface treatments, and refining functional specifications such as strength, tension, or compatibility with specific applications. These details are defined during development and approved through sampling so finished components perform consistently across production runs.

In-Stock products in different sizes, colors, or finishes

Adjusting in stock products to different sizes, colors, or finishes is often a straightforward process for us, especially for hardware. We offer custom color options for snaps and other hardware components to create new variations when needed. If this is something you are interested in, reach out and we can talk through what is possible based on the item. In some cases, when a new size, color, or finish has broad appeal, we may add it directly to our annual catalog so it becomes available to all customers.

Call us with questions Monday-Friday 7 a.m. - 4 p.m.

Shop

Warehouse Location

Contact Us

SHOP

HELP

OUR COMPANY

Shop

2-Hole Mother of Pearl Style Button with Shiny Finish

2-Hole Mother of Pearl Style Button with Shiny Finish

Providence Bone 4-Hole Button with Shiny Finish

Providence Bone 4-Hole Button with Shiny Finish

Providence Bone 4-Hole Button with Shiny Finish

Milward Green Carded White 10mm (16L) Nylon Shank Satin Covered Button

Warehouse Location

Contact Us

SHOP

HELP

OUR COMPANY